/irs/image_bin/x/6960419.jpg)
| Global Work Boats | |
| Po Box 8160, Fremantle, WA, 6160, Australia | |
| Contact: | Stephen Collett |
| Telephone: | Reveal Telephone Number |
| Mobile: | Reveal Mobile Number |
| All Global Work Boats Listings | |
Global Work Boats is the solution for all your commercial needs in the marine industry for work boats, from small transfer vessels to large specialised ships. Using our truly global network of international brokers, it will cost no more to find the work boat which fits your ideal specification at Global Work Boats, whether it's a used or new vessel. Use the menu at left to browse our continually updated selection of vessels for sale.
With years of experience in new builds and commercial boat brokering, we have many international clients who use our services for all their needs, whether buying or selling a barge, fishing vessel, port operations craft, oil and gas tender, passenger boat or any other category of commercial marine vessel.
Based in Fremantle, Western Australia, we are central to the Asian markets. We have also extensive networks and clients in the Americas, European and Arabian markets.
We also can assist in shipping, insurance and delivery.
We have the proven ability to refit existing vessels, or refit newly purchased vessels at one of our many approved yards around the world.
We also offer a consultation service for new builds and project development in the commercial marine industry.
Current View: All Global Work Boats Listings (175) | Asian Listings Only (121)
Used Boats: 121 Adverts Displaying: 1-50
40mtr 2021 build Crew Boats (4)
There are currently 4 units available. 2 are ready for delivery and two available within 4-5 months from signing. Aluminium Monohull with quadruple propellers/twin rudders. Forward fully air conditioning crew accommodation/ passenger salon. with flush, no-obstructed cargo deck.
LOA 40mtrs x 8.2mtrs. Suited for shallow water with draft at 2mtrs. Classed ABS+A1 HSC Crewboat +AMS
Powered by 4 x Cummins KTA 38-M2, 1430hp ea with 90kw Bow Thruster,
25 knots, 85%M... read more 
Built in 1995 by reputed shipyard MIHO Shipbuilding, this fast ferry is available for March 2024 Delivery.
Powered by twin MTU 12V396TE74L with a speed of 32 knots.
Passenger capacity 245.
Class is JG, Coastal.
Currently under operation. Inspection by appointment.... read more
16mtr 25knot Patrol Boat new build $380,000
Amazing value for this vessel. I personally visit the yard many times to ensure quality on these vessels. The hull laminate of Vinyl Ester with Kevlar make it bullet resistant. The deep V hull ensures a comfortable and safe ride with a sister ship surviving a sea state 8 with no damage. The standard package delivers a sprint of 25 knots but can be increased up to 40 knots. The design is RINA class and CCS (IACS approved). At cruise, the vessel will have 5 days endurance, seating for 6+2, small g... read more 
This vessel is now completed and ready for delivery. Local Chinese ZC Class.
Powered by twin 6210ZLC (1350hp ea) engines with cruise speed 11 knots.
LOA 101.75m x 21.08m with 4.09m laden draft.
Double bottom.
Due to COVID restrictions, it is suggested that an independent Chinese Marine Surveyor conduct inspection on your behalf.... read more 
Principal Dimensions:
Hull Length = 18.37Ft (5.60m)
Beam = 6.36Ft (1.94m)
Weight = 900 kg
Power (Rec.) = Yamaha 33hp Marine Diesel Engine with Sterndrive
Engine Model = Yamaha ME130SM + MU1A
Fuel Tank Capacity = 80 litres
Material = Marine Grade Aluminium Alloy (5083H321)
Hull Thickness = 3 mm thick
Deck = Approx 2 ft
Construction Class = Non-classed
Standard Configuration
1) Multiple Chambers construction, Unsinkable 6” D Fender.
2) Marine Grad... read more
18ft Electric Rubbish management vessel SGD 140,000
1) The sleek and upmarket design and look of the Scavenger 18 makes it an unobstrusive workboat silently working at any worldclass marina or waterside residential areas.
2) It is in operation worldwide in canals, and upscale marinas for the easy cleaning and collection of floating rubbish, seaweeds, plastic bottles etc. Motorised Rotating Stainless Steel Bascule Filter Cage makes clearing floatsam effortless. The rotating basket can pickup 20kg per load and the boat has a total load capacity ... read more 
This vessel is now completed and ready for delivery within 30 days signing.
The vessel is classed American Bureau of Shipping (ABS) +A1, Oil Carrier/Chemical Carrier, (E) +AMS, +ACCU, ESP, RRDA, VEC-L, CPS, TCM, PMA, UWILD, IHM, ENVIRO, CRC, POT, MLC-ACCOM, PMP, BWT.
The vessel is a single-screw driven by one (1) set of low speed marine diesel engine for ocean going service with machinery and accommodation located aft, having forecastle and four (4) tiers of deck house. Six (6) pairs of dou... read more 
Looking for a small and extremely tough boat that is both practical, safe and reliable, the 18 Workboat is for you. The 3mm thick aluminium hull with double bottom foam filled construction makes this boat virtually unsinkable even when completely flooded.
The open cockpit designs has several variations to cater to different needs and uses. It also has a self draining cockpit that will drain water naturally and quickly. No electrical bilge pumps are required which makes the boat easy to mainta... read more 
The Rescue 20 is Built solidly with marine alloy hull and fitted with Specially formulated light weight High Impact, Bullet-Puncture Resistant PU foam fendering system.Our fenders are closed cell and coated with double braided Polyurethane skin to ensure that it is strong and yet light.
The boat is approved according to SOLAS Chapter lll, Reg 7,1.2 & Reg 8,2.1 LSA Code 5.1.1.3.1,4.4.2.2.2,4.4.2.3 & 4.4.3.5
Suitable to be used as a Patrol Craft,Fast Rescue Craft,Workboat.
... read more 
A versatile vessel that can meet the requirement for a diverse range of roles. The vessel is not classed.
Standard Configuration:
1) Multiple Chambers construction
2) Marine Grade Aluminium Alloy Construction
3) Multiple Transverse & Longitudinal Frame Reinforcement structures under deck
4) Reinforced keel and chines
5) Aluminium alloy deck full welded with non-slip surface
6) Self Draining cockpit deck with twin drainage hole and scuppers on port and starboard side.
7) Non-... read more 
3300DWT Grab Barge
Built in 2016, this 80mtr self propelled Grab Barge is now available ex China. Class is ZC with potential operational capacity to move 1500t per hour of sand. coal, ironore etc.
Powered by twin Guangxi Yuchai YC6CL960L-C20, 1000hp engines. Crane engine Guangxi Yuchai 970kW.
LOA 80m x 21m.
The crane is 40t lifting capacity with a 20m3 Grab Bucket. Lifting speed 60m/min, luffing speed 50m/min. Crane range is 35mtrs and cenrally located.
Capacity 3300t cargo hold.
... read more 
Built in 2010 under CCS Class, this double/ double 834DWT tanker is available for prompt delivery.
LOA 50.98m x 9.6m with laden draft of 3.5m.
Powered by G6190ZLC-1, 450kW, ShanDong JiNan engine
Heating Boiler is LSK1.5-0.7, 1500.00kg/h.
There are 10 holds.
Operational Area is A1 and A2 (CCS Domestic) Coastal Areas.
Next SS due July 2025.
Inspection is available in China by appointment.... read more
21m Coastal Towing Tug $1,500,000
Built in 2021, this verstatile workhorse is available for prompt delivery, ex Korea in local Korea Class KOMSA, COASTAL
Powered by a Yanmar 6AYM-WET 755 PS engine with AT 20T
LOA 21.79M X 6.6M with a draft of 2M.
GRT is 72t
The vessel is available for inspection in South Korea by appointment.
For a more detailed specification, please feel free to contact us.... read more 
Built in 1983, this Crane Barge is available prompt delivery ex Far East in RINA Class.
Powered by triple MTU 12V 396 TC52 engines (9906hp total) with triple Voith-Scheider Cycloidal Propellers.
3 x 925KVA Generators with 230 KVA energency.
LOA 60.3m x 21.7m
Built in Germany (MTU)
For a more detailed specification, please feel free to contact us.... read more 
This fully electric demo vessel is available for prompt delivery ex Singapore
An Innovative zero emission vessel with the first floating battery swap technology and autopilot.
The vessel is fully electic and autonomous. The boat can operate apprx 4.5 knots for 6-8 hours and has a 3kW solar charge.
Work applications can be passenger, workboat or modified for rubbish collection, water sampling etc.
Complete with Dockside charging also.... read more
3800t Crane Barge $61,000,000
Built in 2011 at a cost of $120m, this 3800t Crane Barge is now available for prompt delivery, ex China in current CCS Classification (IACS)
Rare to the marketplace, the barge measures 148m x 46m.
Main crane max testing limit of 3800t. Revolving 2800t.
Aux crane 40t.
Large accommodation module with 372 person capacity.
3 x 1000kW main generators with 2 x 400kW aux and 1 x 100kW emergency.
Clear deck area of 35,000m2 with 20tm2 loading. Deck load capacity 4000t.
8 point mooring system.
Fo... read more 
Built in 2016, this self propelled Heavy Lift / Pipe Laying Vessel s available for sale or charter.
Ship Type: DP2 Heavy lift and Pipe Lay Vessel
Blt:2016,China Class:CCS Flag:China★CSA Pipe layer,Floating crane,Lifting appliance,SPS, Ice class B，Helicopter facilities★CSM DP-2, Navigation Area:unrestricted
LOA/Beam/Draft:105.00m/26.00m/4.70m
Max.Deck Loading:10t/m2. Accommodation:212 persons.
Crane capacity: Main hook with limited revolvin 300t*27.5m, Main hook with full ... read more
These 3 new build Focal; designs with BP of 110t will be avaiable shortly ready for delivery direct from shipyard.
Classed ABS +A1 (E) Offshore Support Vessel, AH, Tow, OSR - C1, FFV 1) SPS, + AMS, + DPS-2, UWILD, BW.
Accom for 60. Power is via 2 x Wärtsila 6L32 8000hp. Bollard Pull 114 ts propulsion 2 x CPP in nozzle with2 x flap type rudders. Fwd Trhuster 2 x 800Kw Tunnel and aft thrusters 2 x 670Kw Tunnel generators 3 x 500Kw CAT C18 and 2 x 1800Kw Shaft driven alternator.
Deck loadin... read more
Unique to market, an opprtuntity is available for purchase of this diesel/ electric vessel built 2015. Purchase with ongoing charter or CF July 2024
The vessel is registered as a Mobile Offshore Unit vessels. Class is American Bureau of Shipping, for Unrestricted Service and special survey to hull and machinery for class notation:+A1, Column-Stabilized Unit, Circle E, +AMS, DPS-3, UWILD, Helidk.
Passenger accom for 432 with 69pax crew accom.
Powered by 6 MAK 9M25C, 2800kW engines.
Pr... read more
I have inspected this yards builds and can attest to high quality.
This design is very practical and good value for new builds One vessel available now (final paint system to buyers colours required) with another 2 vessels ready in approx 3 months..
Powered by twin SDEC D683ZLCA8B 350hp ea engines with 10kva genset.
The vessel can be built to BV Class or less price for local class.
Crew capacity for 8. Speed will be around 24 knots.
Please feel free to contact us to inspect the vessel and s... read more
13,000DWT Bulk Carrier $5,100,000
Built in 2020, this 110mtr Bulk Carrier is available for prompt delivery, ex China at very good price, discounted.
The vessel is in current ZC Classification, Coastal Ice grade B. May be changed to different class by negotiation.
LOA 109.8m x 21m with 6.5m draft.
Powered by a Guangzhou 3000hp engine.
Cargo holds (5) are double bottom/ sides.
A detailed build specification and equipment list is available upon request.
Price reduced to $USD5.1m firm.... read more 
This new build Bulk Carriers are available for NB Slots. Approx 40 months lead time. The Carrier is fitted with C Type LNG tank with approx. 6000cbm capacity which makes it suited for routes like Australia / China.
LOA 299.95m x 50m.
Class ABS + A1, (E), Bulk Carrier, BC-A, CSR, Hold No's 2,4,6 and 8 may be empty, AB-CM, CPS, +AMS, ACCU, ESP, POT, IHM, UWILD, GRAB (35), TCM, GFS, DFD.
Tank Capacities Cargo Hold 244,500m³, Heavy Fuel Oil 2000m³, Fuel Gas 6000m³, MGO 900m&su... read more 
Whether you require Open Loop or Hybrid Scrubber, we can quote very competitively in reputable shipyard in China.
Through extensive R& D, these exhaust scrubber systems are now available. The pricing is extremely competitive globally. Lead time approx for open loop is 7 months and hybrid 8-9 months. DD facilities also available 50,000DWT (... read more 
I have personally inspected this shipyard and can attest to quality build / fitout.
The build has just commenced for this vessel. Final engines can be at your requirement.
LOA 39m x 7.6m, Classed BV.
Standard power is by 3 x Baudouin 12M26.P2 (1500hpea) with bow thruster.
Aux engines 2 x Baudouin 6W1055 (95kw)
Fitted with 72 high quality Business Class seats. The legroom is large so capacity could be increased to around 100 if required.
4 cabin/ 8 berth configuration.
Remote FIFI Monitor ... read more 
These two units of these Ultramax Carriers have just been sold.
Slots available for another two for 2024 delivery.
The two vessels can be completed depending if Tier2 and HCSR compliance is required within the next year. LOA 199.9mtr x 32.26mtr. Tank capacity 77,400m3 (grain). Classed bV1 + Hull Bulk Carrier CSR, CPS(WBT), BC-A (holds 2,4 may be empty), ESP, GRAB(25), Unrestricted Navigation, VeriSTAR-HULL CM, BWT, INWATERSURVEY, GREEN PASSPORT,+MACH AUT-UMS MON-SHAFT. Powered by MAN 5S60ME-C... read more 
This vessel is due for completion December 2019.
It is a three-legged GM-J180A accommodation jack-up. The vessel is intended for accommodation service for wind farm maintenance in water depth up to 45m in Southern North Sea (including Southern UK water and Denmark water). The deck area of the unit shall to be about 500m2, with 2300 ton vessel’s variable load.
The vessel basically consists of an almost triangular pontoon shaped hull, three open truss legs and pin in hole type hydraulic e... read more 
Designed by reputable Stealth Military Boat Designer, this 52 knot vessel leads in technology. The hull is Carbon, Kevlar, Vinyl Ester and E-Glass with ballistic protection to NIJIII and windows to NIJIIIA. Powered by 4 MAN V2000 M94 engines with and endurance of 420nm @ 30 knots, with a sprint of 52 knots. The vessel may be built to RINA, CCS or IACS option. Accommodation is provided for 10 crew with a crew mess, interrogation room, gun and ammunition lockers, two Officer’s cabins, galley... read more 
New Build Barges for sale
Various New Buld Barges for Sale
GWBABARGE1805
1; 180ft Deck Cargo Barge - Singapore
4 units available sale / charter
180ft x 50ft x 10ft
Deck loading 10t m2
ABS A1 Barge; Unrestricted Nav
2; 180ft Deck Cargo Ballast Tank Spud Baarge CHARTER ONLY Ex Shanghai,
GWBABARGE1806
180ft x 60ft
Deck Loading 20t m2
Classification ABS A1 Deck Cargo Barge Ballast Tank Spud Barge
Ramps bow and stern
3;180ft Deck Cargo Ballast Tank Barge C... read more 
Built in Japan in 2009 by Niigata, an opportunity for purchase of this AHTS DP2 is available.
Currently classed under CCS with notations ; DP2, TUG/OFFSHORE SUPPLY SHIP/ FIRE FIGHTING SHIP 1, ANCHOR HANDLING.
LOA 71.2m x 16m.
Powered by twin Wartsilla W7L32, 3500kW@750rpm. Twin 700kW Bow Thrusters and a 500kW Stern Thruster.
Bollard Pull 124t with clear deck area of 470m2 (5tM2 loading)
Vessel currently under operation Far East.
Inspection may be possible by appointment.
For... read more 
This vessel has just sold however new build lead time available 6 months, delivery, ex Singapore.
The vessel is built to BV Class. LOA 17.7mtr x 4.55mtr. Passenger Capacity of 12 with 4 crew. Accom for 4 crew also. Powered by twin CCEC Cummins NTA855--M (350hpea), the vessel has 16 knots sprint, 12-14 knots cruise. Deck area of 30m2 with loading at 1tm2. One x 20KW 3ph genset. Inspection of the shipyard in Singapore is available by appointment.... read more 
Built in 1998, this vessel completed SS in January 2023 and now available for sale or charter, ex India
LOA 67m x 16m with deck area of 500m2. 80t Deck pedastal Crane.
Powered by twin 2730hp Engines. DP2 K-Pos Kongsberg DGPS.
Total compliment for 65.
4 point mooring system.
For a more detailed specification, please feel free to contact us.?... read more 
This new build is almost complete and can lend herself to a variety of work tasks.
The vessel is designed principally for Work-over operations and Well Testing. Equip with three cylindrical pile legs and cantilever beam device. Depth operation 5.6m - 50mtr and used for heavy or light overhaul of 5500m (3.5') within the straight/slope wells.
Propulsion is via 2 x 1100kW Azumith and 1 x 350kW tunnel thruster.
LOA 54,5m x 40.7m. Classification CSA Self Elevating Workover Unit; Thruster, HE... read more 
This 18 knot cruise speed Crew Boat just launched in BV class is now ready for delivery ex Dubai.
With limited new tonnage in Crew Boats on the market, it is good to see a Dubai shipyard produce a quality vessel with Cross ?HULL, MACH CREW BOAT notation
Powered by triple Cummins KTA 38 1350hp engines, the vessel has a sprint speed of 25 knots with cruise speed at 18 knots.
Twin Bow Thrusters. Fuel capacity 96,000ltrs.
The deck area is 105m2 with load capacity of 70t at 2tm2.
Shallow... read more 
Direct from owners, we are proud to offer this 2019 build Pipe Laying Barge (non DP). Ability to operate up 350m depth with pipe range 4" - 60".
Available for Sale or Charter Options.
Basic details are;
Classification CCS
Flag Liberia
Date of Registry 30-May-2019
Length Overall (LOA) 172.50m
Length Between 168.00m
Length Load line 162.232m
Moulded Breadth 35.00m
Moulded Depth 12.50m
Draft 7.8-8.0m
Water Depth 350m
Gross Tonnage 28533 tons
Net Tonnage 8559 tons
Loaded Dis... read more 
120ft Ballastable Deck Cargo Barge
Built in 2014 in GL+100A5 Classification, this deck cargo barge/ Harzardmat Carrier located in Singapore is now available for sale.
LOA 35.11mtrs x 12.19mtrs.
Deck loading 10tm2 with 650DWT. Clear deck area 400m2.
10 x Ballast tanks. 4 x 300t lifting plate eyes.
Due to COVID restrictions, suggest an independent Marine Surveyor for inspection purposes.
For a more detailed specification, please feel free to contact us.... read more
3500DWT Bulk Carrier $2,500,000
Built 2021 in current ZC Class (may be changed), this vessel is now available at a very good price.
LOA 80mtrs x 14mtrs x loaded draft 5.3m. DWT 3500t, 2124GT. Double hull/ bottom.
Powered by 1800hp Ning Dong main engine.
Priced to sell $USD2.5m firm.... read more 
Built in 2002 with passenger capacity of 930 and 358 medium size cars, this vessel is available for prompt delivery, ex Japan.
Built by Mitsubishi Heavy Industries, Japan in KR Class.
Powered by twin NKK/NKK-SEMT Pielstic 18PC2-6V 13,500hp (ea) engines with speed of 23.2 knots.
Car capacity 358@1.6t with 37 Motorcycles.
GT9832t.... read more 
This small tanker has just been sold, next due late 2022.
For a more detailed specification, please feel free to contact us.​
The ship is built and classed to CCS Classification. LOA 69.2m x 11.2m with loaded draft at 3.8mtrs. Powered by single 6210 ZCL-21 main engine (883kw). 2 x aux engines and anchor genset. Cargo tanks (5) are all Stainless Steel with double bottom / sides.
Inspection at the shipyard is available by appointment.... read more 
Built in 2011 at a cost of $120m, this 3800t Crane Barge is now available for prompt delivery, ex China in current CCS Classification (IACS)
​
Rare to the marketplace, the barge measures 148m x 46m.
Main crane max testing limit of 3800t. Revolving 2800t.
Aux crane 40t.
Large accom module with 372 person capacity.
3 x 900kW main generators with 2 x 400kW aux and 1 x 100kW emergency.
Clear deck area of 35,000m2 with 20tm2 loading. Deck load capacity 4000t.
8 point mooring syste... read more 
I have inspected this yard and vessels in Singapore and can attest to quality build practices.
This vessel is now sold, new orders can be built with 6 month lead time depending on engine choices.
A very robust boat versatile for lines/ work/ mooring, Bollard pull of 2 ton.
LOA 9.5m x 3.4m x 1.4m
Built to BV spec. Powered by single 225hp Shanghai Diesel SC72H250CA2.
The vessel can also be fitted with engine driven fire pump with deck mounted monitor if required.
Inspection at the builders&... read more 
This new build tanker in CCS Coastal Classification is available for prompt delivery
For a more detailed specification, please feel free to contact us.​
The vessel is Double Hull/ Double Bottom and all tanks/ piping Stainless Steel. Suited for Ethanol or similar product.
LOA 69.2m x 11.2m x 3.8m. Powered by 6210ZCL-21 Zibo ain engine 883kW.
Priced very well for new build.
Please feel free to contact us for a detailed specification and pictures.
Inspection available by appointment.... read more 
Built in 2021 by reputable Aluminium Builder, these vessels are now available for sale.
The 7.8m is powered by a Yanmar 422STIP2 245hp engine with passenger capacity for 12.
The 5.5m powered by Mercury 60hp with 8 pax.
The vessel is located in Singapore and can be inspected by appointment.
I have inspected many times vessels built by this builder and can attest to quality.
For a more detailed specification, please feel free to contact us.... read more 
Launched in 2016 in current CCS Class, this self propelled, 212pax Pipe Laying/ Heavy Lift barge is available for sale or charter.
Class notation *CSA Pipe Layer, Floating Crane, Lifting Appliances, SPS, Ice Class B, Helicopter Facilities, *CSM DP2, Unrestricted Navigation.
LOA 105m x 26 mtr. Crane capacity 300t@27.5mtr, aux crane 30t. Accommodation for 212. Main Engines: 2 x Zichai LC8250ZLC-2,2 x1,765kw@825rpm
Main Generators: 4 x LB82502LD-4,4x1,200kW
Main Thrusters: 2 x WSP240-FP,2 x1,... read more 
Built in 2000, this Ropax Ferry will be sold in March 2024 via tender in Japan.
- Official Inspection : from 1300 to 1500 on March 22 (Fri) at Himeshima in Oita prefecture.
- Tender : April 4 (Thu)
Demand remains high for these Japanese built ferries for inter island passenger/ car/ cargo transport.
Cargo capacity is for 17 standard cars with 211 passengers.
Powered by twin Yanmar 6N 18A-UN (500hp ea) engines with a cruise speed of 12.5 knots. Crew compliment for 6.
Below 200 G... read more
This new build is completing sea trials and available prompty. Additionally, 2017 sistership also available. With International demand at all time high for new tonnage, this vessel will sell quickly.
Classed under BV.
Powered by twin MAK 8M32C (5440hp ea) with BERG CPP, BP at 151.6t.
Bow Thruster 2 x 12t, Stern Thruster 2 x 10t.
Approx 600m2 with loading at 7tm2
Capacities;
FO 870m3
Drill Water 1100m3
Potable Water 480m3, fresh water 480m3
Liquid Mud/ Brine 540m3
... read more
26mtr Tug (Zero hours) $675,000
This vessel was completed in 2017 in Current RINA Classification with zero running hours on main engines and aux engines.
Built and located in Vietnam..
Powered by twin MAN 2842LE410, 809kw engines with BP at 22t. Twin 56kw Aux engines
LOA 26m x 8m. Accommodation for 10 crew.
30t Towing Hook. Next Shaft/ SS due 2022.
Priced very well $USD675,000.
Please feel free to contact us for full specification.... read more 
This vessel is near completion and will be available for delivery within 2 months of MOA signing.
LOA 78m x 16m x 5.1m.
Following are all quality components for build.
Bow Thrusters -Rolls-Royce
Main Generator Sets 4 x 910 ekw Caterpillar
Emergency Generator Caterpillar
Electric Propulsion Rolls-Royce
Azimuth Propeller RR
Frequency Convertor System and Transformer Rolls-Royce
MSB & Control Console Rolls-Royce
All Cargo Pumps Engine Room Pumps Ing. Per Gjerdrum A.S.
DP2 & ... read more 
A rare opportunity to purchase this new build 20mtr Pilot Boat, sea trials completed ready for delivery, ex China.
This Aluminium Pilot Boat is powered by twin Volvo ISP900 system (515kW each). It is ideally suited for pilot boats with fuel efficiency and maneuverability.
LOA 19.98m x 5.2m with shallow draft of 1.1m. Speed 25knots sprint, 18 knots cruise.Passenger capacity for 11.
It is rare that these new builds are available for prompt delivery and built to spec.... read more 
A unique versatile ROPAX ferry has just been completed. Built to high end spec by Suzuki Shipyards in Japan to JG Coastal Class (non IACS).
These vessels have a proven working life well beyond 25 years full service. This is not a bargain sale, but represents new build cost to high end spec by very reputable shipyard. An excellent long term investment for inter island transfers in open ocean.
Powered by twin Yanmar 12AY-WGT 1650hp engines with bow thruster.
LOA 35.9m x 7.2m.
Passenger ... read more 
This tug built 2012 is in current CCS Class, CSAD Tug, ICE CLASS B Offshore Navigation area, CSM. It is suited for a variety of purposes, Harbour, Towing, Pushing and Offshore Platform Service
LOA 36.6m x 10.5m. Powered by twin QingDao ZiChai BoYang 2400hp each (Sino-Japan Joint Venture Engines) with Imported Baoding Hongqi ASD drives.
Bollard pull of 60t. GT425t. Accommodation for 12, fully air conditioned.. External FIFI 600m3/hr. This may be upgraded to FIFI 1 if required.
Inspection av... read more