Cutter basket for 14” Dredge  For sand  Keyway 1"x 1/2'  Shaft 4 1/4"  Inside ring is 45 1/4"  Inside of inside ring 38 1/2"  Hub 12" deep x 8" ( 8"? is as best owner can tell/ It has to be turned over to measure)  Like new  Located in Michigan  Price reduced from $1,700 USD to $1,300 USD... read more

This offshore access system (gangway) is in need if you want to perform safe personnel transfers in sea states up to 3m Hs. Because of its full motion compensation, there is no movement in the gangway during operation, resulting in the safest and most comfortable way of people transfer. The gangway can transfer 20 people in under five minutes from a vessel to a fixed or floating object. A used system that is safe, proven and efficient. Fully in Class and ready for deployment. Available for Sale in SE Asia. *Note: Second typical used gangway system is available for sale in Europe whi... read more

LIEBHERR BOS 2600-25 D Lit offshore crane. Excellent overall condition. Only 590 hours on the engine. The crane is located on key-side in Norway – readily prepared for quick pickup/installation by single lift. The crane is prepared for a single lift installation. Upon request the actual lifting capacity of 25 to can easily be increased by upgrade to 2 or 3-Falls hook reeving. A (conical) pedestal adapter is available. A pedestal with a length of 9 m is available. DESIGN CRITERIA Design Criteria, Rules, Regulations API (American Petroleum Institute) – Specification 2C for Offshore Pedesta... read more

LOA 2,76 m Beam 2,76 m... read more

Timberland Double Drum Winch – 27,000 # Line Pull • Timberland model 400-2-25 • 2 drums 36” x 54” • 27,000 lb. Line pull • Deutz Diesel – 6 cylinder with reverse transmission • C/w cabin • Brake and safety lock • Completely rebuilt • Located in Quebec • Price $98,500 CDN Reference No. WH2018... read more

Timberland Winch - 200,000 lbs 500 hp Cable size 1.5" up to 2.5" Dimensions: w:12.3', l: 25', h: 11' Drum height 12' Located in Quebec, Canada Price: $262,500 CDN also available to lease Reference No. W2097... read more

5 Drum 35 ton Madill Winch Built by S. Madill, Nanaimo, BC Model # 5-30024 Single Line Pull – 35 tons 5 drums Powered by 4-71 Detroit Diesel Winch & engine have been completely refurbished Never used since rebuilt Located near Port Dover, Ontario, Canada Price: $35,000 CDN Reference No. WH2075... read more

Telescopic Marine Crane particulars: GRU Marina 260 to. Single pull 40 To. Type VVMT 260.000 ST3/R2/24 No:1027717—19 24.02.1999 RINA 98/NA/5987/CO Hydr. Tank Capacity 1500 Ltr. Rotational Torque 181 kNm Rotational Angle 360 Continu Weight of crane 40 Tons Crane is stored dismantled in Germany Crane was lately 02/2023 removed from vessel therefore is presently incomplete. Crane hydraulic power pack is still on board (two hydraulic pumps, one oil tank). Can be dismantled on request. Crane slewing bearing is out of order due wear, renewal required. Crane pedestal is available (presently stored ... read more

2T Motion compensated Knuckle Boom Crane. Incl HPU (The Colibri™ crane functions both as a normal offshore crane with AHC, and as a 3D motion compensated crane, without the need for any mobilization or interchanging of parts. The Colibri™ has it’s own cylinders that control the articulation, so switching from Main Winch operation to Colibri™ operation can be rigged in a couple of minutes.)... read more

Aluminum pancake structure - Aluminum type Helideck high friction top profiles. - Aluminum girder framework of I-beams. - Necessary bolts, clamps and sealing compound for assembly. - Sealing plate for sealing the split in top profiles. - Octagonal shape Approx. Weight: - Aluminum Deck: 9.100 Kg - Aluminum I beams framing and support: 3.900 Kg All information displayed is indicative, but believed to be correct. For the current status and availability please enquire Built in year 2019... read more

Typical Application WROV LARS Luffing: 12Te Overboard Rating: 17.6Te DAF 3 Sea-­-State: (Approx.) 6 Operating temperature: -20C to +45C Length: 7000mm Width: (base) 4036mm (excluding deck mounts) Height: (max) 10797mm Distance between legs: 2900mm Road transportable All information displayed is indicative, but believed to be correct. For the current status and availability please enquire LOA 7 m Beam 4 m... read more

Full Set For Sale at Asking Price of EUR 30.000 - every Offer will be seriously reviewed/replied. Type and Size Amount Yokohama Fenders (Large, 2m x 3.5m) 4 Yokohama Fenders (Medium) 2 Yokohama Fender (Small, 1m x 2m) 1 Yokohama Fender (Small, 1m x 2m) 1 Yokohama Fender (Small, 1m x 2m) 2 Yokohama Fender (Small, 1m x 2m) 2 Swivel for Yokohama Fenders 4 LOA 6,5 m Beam 3,3 m... read more

Merryweather sea water pump with Ruston & Hornsby Ltd engine. Rated load 102. Speed 1800. Approx. measurements: length overall 2.5m plus 2.5m hose. Width 0.9m. Collection only. We are able to help loading the pump onto a trailer. The pump will not be released until we have cleared funds. We will accept card payment, cash or a bank transfer. Sorry no PayPal. Gave the engine a run. It started easily and ran well. (3.3.17)... read more

100 tons AHC Knuckle Boom Crane Newbuilding resale • Built : 2016 in Singapore • Class : ABS • SWL : 100 tons @ 12 mtr / 62 tons @ 12 mtr subsea • Max water depth : 2000m • Speed : 60 mtr/min • Weight : 290 tons • HPU : 1600 KW • Location : Singapore • Price : US$ 4.5 million All information displayed is indicative, but believed to be correct. For the current status and availability please enquire Built in year 2016 1 KNB installed with a max lifting capacity of 100 tons... read more

Liebherr LMH 400 crane Yp / BJ 2008 Just abt. / nur ca. 1.500 operating hours 104 t lifting capacity / AC in cabin Emergency Descend Flood Lights Spreader Steering Rotator Video Surveillance All information displayed is indicative, but believed to be correct. For the current status and availability please enquire Built in year 2008... read more

Built in year 2001 1 Crane / Gear installed with a max lifting capacity of 50 tons... read more

Design helicopter: Sikorsky S92 Ex zone: Safe zone Maximum take off weight 12,565kg Classification society RINA Structural design RINA Aviation requirements: UK CAA CAP 437, RINA Aluminium profiles 6005-T6 and 6082-T6 Aluminium plate 5083-H116/321 Steel supporting structure EH36 Tranberg safte zone TEF enclosures for electrical windsock, perimeter lights, flood lights and junction box, Tranberg TEF HD light contr. System Helideck circle and H lights All details given in good faith, without guarantee LOA 22 m Beam 22 m Built in year 2019 Class : Registro Italiano Navale... read more

Brief technical specs: Ext. Dimension (mm) : 6,058 x 2,438 x 2,591 Int. Dimension (mm) : 5,888 x 2,330 x 2,257 Tare Weight (Kg) : 4,000 Payload Weight (Kg) : 16,000 Max Gross Weight (Kg): 20,000 Designed, fabricated, tested, and marked in accordance with DNV2.7-1, certification notes by Lloyd Register All information displayed is indicative. Individual container’s dimensions and costs may differ. LOA 6,06 m Beam 2,44 m Built in year 2019... read more

Ext. Dimension (mm) : 3,903 x 1,875 x 1554 Tare Weight (Kg) : 1,400 Payload Weight (Kg) : 5,100 Max Gross Weight (Kg): 6,500 All information displayed is indicative. Individual container’s dimensions and costs may differ. LOA 3,09 m Beam 1,87 m Built in year 2018... read more

Brief info: 20' Reefer Container - used - year of construction 2001. - duty paid - year of construction 2001 - Carrier aggregate - Aluminum floor - PTI-tested - with valid CSC-badge - optically and technically overhauled 2 years ago - free loaded Depot Bremen - Quick delivery LOA 6,06 m Beam 2,44 m Built in year 2001... read more