5T Motion compensated Knuckle Boom Crane. Including HPU, Pedestal height 8m New build crane with availability of 8-10 weeks EU port delivery, please contact us for load charts and technical details Available in EU. Shipment and installation worldwide.... read more

Classification Safe Area (Not suitable for oil rig installation) Type Hydraulically powered A-Frame Certification/standard Designed in accordance with DNVGL-ST-0378 Dynamic Amplification Factor 2.5 Safe Working Load 30 t Operational Dimensions Length 22600 mm, Width 13450 mm, Height 13680 mm (arc max) Dimensions for shipment 1. Left Leg. 11915 x 1405 x 3015 mm, m = 26 400 kg 2. Right Leg. 11915 x 1405 x 3015 mm, m = 26 400 kg 3. Top Beam. 13826 x 2620 x 3050 mm, m = 23 600 kg Weight 76 400 kg Operating temperature -10°C up to +45°C Deployed reach = 8200 mm Clear spacing between legs = 11550 ... read more

13 TONS SWL UMBILICAL WINCH Mobile 13 Te SWL Umbilical Winch Description Classification Safe Area (Not suitable for oil rig installation) Type Hydraulically driven winch Certification/standard Designed in accordance with DNVGL-ST-0378 Dynamic Amplification Factor 1.7 Safe Working Load SWL 13 Tons Dimensions Length 3200mm, Width 4200mm, Height 2800mm Weight 20 000 kg Operating temperature -10°C up to +45°C Drum Storage capacity 1650m (based on 44,0mm diameter umbilical cable) Drum configuration Parallel-groove drum shells (LEBUS) Speed 30m/min Level-wind Automatic Slip ring Focal 176, Not in... read more

Built in year 2019... read more

LOA 45 m Built in year 2020 Design is : SPA85L... read more

GLC-800-ED-S around aft port leg Long boom: 640t at 30m outreach (max height 119m at min radius) Short boom: 800t at 26m outreach (max height 102m at min radius) Auxilliary hook: 50t (certified for man-riding) Mean wind limit [m/s]: 16 Built in year 2008... read more

Mobile 10 Te A-Frame Description Classification Safe Area Type Hydraulically powered A-frame with Docking Head Certification/standard Designed in accordance with DNVGL-ST-0378 Dynamic Amplification Factor 1.7 Safe Working Load SWL 10 Tons Operational Dimensions Length 7000mm, Width 3610mm, Height 9805mm (arc max) Weight 18 100kg Operating temperature -10°C up to +45°C Deployed reach = 4100mm Distance between legs = 2930mm Docking Head - Raise-lower snubber - Side-swing snubber - 270-degrees rotation on snubber Controls - Inboard / Outboard - Docking head rotate - Snubber - Latch controls - ... read more

The KenzFigee AMC Gangway is an advanced solution designed for the safe and efficient transfer of personnel and cargo in offshore environments. Certified according to DNVGL-ST-0358 (December 2015) and DNVGL-ST-0378 (May 2016), this gangway offers unparalleled stability with its 3D Active Motion Compensation technology, ensuring precise motion control through telescoping, slewing, and luffing. Key features include the ability to perform cargo transfers of up to 1000 kg in Crane Hook Mode (CHM) and maintain personnel transfer stability in Personnel Transfer Mode (PTM) via an intelligent bumpe... read more

Two used and identical boatlandings ready to be put on a vessel. LOA 12,1 m Beam 4,74 m Built in year 2012... read more

A very suitable A-frame which can be used in multiple roles. The A-frame was refurbished in 2015 and used for approx. 8 months on an Norwegian OSV. The A-frame has since then been preserved and stored at the yard. Rebuilt in 2015 AF installed... read more

In overall good condition, well preserved by Owners in their yard. Technical information: Capacity for internal handling 200 mT Capacity for external handling 250 mT Year of manufacture 1997 Manufacturer Hydralift, Norway Overall width 14040 mm Inside opening 8990 mm Total height 17960 mm Free height (vertical position) 13000 mm Pivot inward 5000 mm Pivot outward 8500 mm Approx total weight 110 ton Hydraulic pressure 250 bar Hydraulic supply 425 l/min Hydraulic tank 3000 liter HPU voltage 440Volt 60 hz Full power rating (S40%) 352 Amp Speed full stroke 150 / 260 seconds Buil... read more

MODULAR BLOWING UNIT WITH CRANE AND GENERATOR BLT 2015 IN GBI BY WELLAND POWER SYSTEM CAN DELIVER 75-120T OF FEED PER HOUR RUNNING AIR TEMP 12-14 CELCIUS MULTIPLE GRADES OF FEED DELIVERABLE PREVIOUSLY FITTED IN CARGO HOLD OF VESSELS USED SUCCESSFULLY OVER 3-4 YEARS, CURRENTLY MAINTAINED IN DRY STORAGE PRICED TO SELL... read more

Located: Singapore / ready for Shipment L TYPE OF CRANE DKW 2000 Offshore Wire Luffing Electro Hydraulic Pedestal Crane PRIME MOVER Electro-Hydraulic ENVIRONMENT High humidity DESIGN TEMPERATURE Design temp -10°C - +40°C. Crane design temperature is in accordance with class requirements for worldwide service. AREA CLASSIFICATION Crane designed for Safe Zone. Electrical equipment on boom tip designed for Hazardous Area – Zone 2 IIA T3 CERTIFICATION - Makers Certificate. - ABS Certificate for complete crane. - API monogram. - INMETRO for Explosion proof electrical components FEM CLASSIFICATI... read more

USA located / ready for prompt shipment Built in year 2015 1 Crane / Gear installed with a max lifting capacity of 75 tons... read more

1 KNB installed with a max lifting capacity of 9 tons... read more

Located Singpaore / ready to be shipped. TYPE OF CRANE DKF 2000 Offshore Knuckle Boom Electro Hydraulic Pedestal Crane PRIME MOVER Electro-Hydraulic ENVIRONMENT High humidity DESIGN TEMPERATURE Design temp -10°C - +40°C. Crane design temperature is in accordance with class requirements for worldwide service. AREA CLASSIFICATION Crane designed for Safe Zone. Electrical equipment on Knuckle jib and hooks: Zone 2 IIA T3. Electrical equipment on Main boom, outer half: Zone 2 IIA T3. CERTIFICATION - Makers Certificate. - ABS Certificate for complete crane. - API monogram. - INMETRO for Explosio... read more

Fairbanks Morse 12 Cyl 38D 1/8 OP Dual Fuel Engine 12 cylinder Condition: Surplus takeout History: Removed from backup municipal Generator plant Located in Midland, Texas Price: On request Reference No. E2675... read more

LOA 14,9 m Cranes / Gears installed... read more

LOA 23,4 m... read more

170 ton at first layer, speed 0 –20 m/min 60 ton at last layer, speed 0 –40 m/min Capacity: 1800m 8” rope or 7000m 3”steel wire Water cooled brake resistors Wire/Rope spooling device Motor Control and local Control Panel (radio) Remote Control Console Low voltage VFD Single drive system Recommended spare parts for five year operation HPU Electric motors: 2 x ABB/Siemens/ Franz Wolfer/VEM 350KW per unit, heater build-in motor IP56, S1 continuous duty, insulation class F Electrical general: Ambient temp. 50 deg C Voltage440V/660V, frequency60Hz Winch Band Brake: Hydraulic set on drum fla... read more