Description

Efficient, Green and High Quality 8600 CBM Trailing Suction Hopper Dredger , new designed and built in July 2026 .
Class CCS (Unrestricted Navigation Area)
Flag China
Class Notation ? CSA Trailing Suction Hopper Dredger; Dredging Within R2;
CSM BRC; G
PSPC(B); Ice Class B
-EP; G-ECO (BWM(T))
Polar Ship Certificate available
Loa x Lpp x B x D 117.54m x 110.20m x 22.00m x 9.60m
Design Draft 6.80m
Dredging Draft 8.30m
Dreger Depth 38m
Gross Tonnage Abt. 8791
Displacement Abt. 18,200t @ 8.3m draft
Deadweight Abt. 12,400t @ 8.3m draft
Complement 32p
Navigation Area A1+ A2 + A3
Endurance Abt. 4000 n mile @ 85% MCR
Design Speed Abt. 13 knots @ 100% MCR and 8.3m draft

Function
Capable of dredging by two trailing suction pipes;
? Capable of dredging silt, clay, fine silt, medium and fine sand, coarse sand, gravel and
pebbles;
? Can deliver the dredged mixture either into the hopper or directly overboard when the
dredged mixture is too light;
? Can dump the dredged material to the seabed through bottom doors;
? Can discharge excess water from hopper prior to dredging using dredge pumps;
? Can pump the soil ashore from the hopper via a self-emptying system - through the bow
connection and shore discharge line;
? Can rainbow the soil from the hopper via self-emptying system and the rainbow nozzle;
? Drag heads are provided with high pressure water jets for loosening compacted soil;
? Capable of diluting the hopper load using jet water pumps to facilitate unloading of the soil
during dumping and discharge;
? When dredging medium-fine sand at a depth of 28m using double suction pipes, the
effective loading time is abt. 55 minutes;
? The distance and height of pumping ashore is abt. 2km and 6m respectively, and it takes
about 100 minutes;
? The maximum dredging depth is 28m below the light loadline (lightship with 10% of fuel and
water, hopper connects to the sea), when the suction pipe and the base line at 45°angle;
? The maximum dredging depth is 38m below light loadline when the suction tube is
lengthened and the suction pipe and the base line are at a 50° angle.
it is ready for your work at any time

Specifications